Primitive Type i64

The 64-bit signed integer type.

See also the std::i64 module.

Methods

impl i64

const fn min_value() -> i64

Returns the smallest value that can be represented by this integer type.

const fn max_value() -> i64

Returns the largest value that can be represented by this integer type.

fn from_str_radix(src: &str, radix: u32) -> Result<i64, ParseIntError>

Converts a string slice in a given base to an integer.

Leading and trailing whitespace represent an error.

Examples

Basic usage:

fn main() { assert_eq!(i32::from_str_radix("A", 16), Ok(10)); }

assert_eq!(i32::from_str_radix("A", 16), Ok(10));

fn count_ones(self) -> u32

Returns the number of ones in the binary representation of self.

Examples

Basic usage:

fn main() { let n = -0b1000_0000i8; assert_eq!(n.count_ones(), 1); }

let n = -0b1000_0000i8;

assert_eq!(n.count_ones(), 1);

fn count_zeros(self) -> u32

Returns the number of zeros in the binary representation of self.

Examples

Basic usage:

fn main() { let n = -0b1000_0000i8; assert_eq!(n.count_zeros(), 7); }

let n = -0b1000_0000i8;

assert_eq!(n.count_zeros(), 7);

fn leading_zeros(self) -> u32

Returns the number of leading zeros in the binary representation of self.

Examples

Basic usage:

fn main() { let n = -1i16; assert_eq!(n.leading_zeros(), 0); }

let n = -1i16;

assert_eq!(n.leading_zeros(), 0);

fn trailing_zeros(self) -> u32

Returns the number of trailing zeros in the binary representation of self.

Examples

Basic usage:

fn main() { let n = -4i8; assert_eq!(n.trailing_zeros(), 2); }

let n = -4i8;

assert_eq!(n.trailing_zeros(), 2);

fn rotate_left(self, n: u32) -> i64

Shifts the bits to the left by a specified amount, n, wrapping the truncated bits to the end of the resulting integer.

Examples

Basic usage:

fn main() { let n = 0x0123456789ABCDEFi64; let m = -0x76543210FEDCBA99i64; assert_eq!(n.rotate_left(32), m); }

let n = 0x0123456789ABCDEFi64;
let m = -0x76543210FEDCBA99i64;

assert_eq!(n.rotate_left(32), m);

fn rotate_right(self, n: u32) -> i64

Shifts the bits to the right by a specified amount, n, wrapping the truncated bits to the beginning of the resulting integer.

Examples

Basic usage:

fn main() { let n = 0x0123456789ABCDEFi64; let m = -0xFEDCBA987654322i64; assert_eq!(n.rotate_right(4), m); }

let n = 0x0123456789ABCDEFi64;
let m = -0xFEDCBA987654322i64;

assert_eq!(n.rotate_right(4), m);

fn swap_bytes(self) -> i64

Reverses the byte order of the integer.

Examples

Basic usage:

fn main() { let n = 0x0123456789ABCDEFi64; let m = -0x1032547698BADCFFi64; assert_eq!(n.swap_bytes(), m); }

let n =  0x0123456789ABCDEFi64;
let m = -0x1032547698BADCFFi64;

assert_eq!(n.swap_bytes(), m);

fn from_be(x: i64) -> i64

Converts an integer from big endian to the target's endianness.

On big endian this is a no-op. On little endian the bytes are swapped.

Examples

Basic usage:

fn main() { let n = 0x0123456789ABCDEFi64; if cfg!(target_endian = "big") { assert_eq!(i64::from_be(n), n) } else { assert_eq!(i64::from_be(n), n.swap_bytes()) } }

let n = 0x0123456789ABCDEFi64;

if cfg!(target_endian = "big") {
    assert_eq!(i64::from_be(n), n)
} else {
    assert_eq!(i64::from_be(n), n.swap_bytes())
}

fn from_le(x: i64) -> i64

Converts an integer from little endian to the target's endianness.

On little endian this is a no-op. On big endian the bytes are swapped.

Examples

Basic usage:

fn main() { let n = 0x0123456789ABCDEFi64; if cfg!(target_endian = "little") { assert_eq!(i64::from_le(n), n) } else { assert_eq!(i64::from_le(n), n.swap_bytes()) } }

let n = 0x0123456789ABCDEFi64;

if cfg!(target_endian = "little") {
    assert_eq!(i64::from_le(n), n)
} else {
    assert_eq!(i64::from_le(n), n.swap_bytes())
}

fn to_be(self) -> i64

Converts self to big endian from the target's endianness.

On big endian this is a no-op. On little endian the bytes are swapped.

Examples

Basic usage:

fn main() { let n = 0x0123456789ABCDEFi64; if cfg!(target_endian = "big") { assert_eq!(n.to_be(), n) } else { assert_eq!(n.to_be(), n.swap_bytes()) } }

let n = 0x0123456789ABCDEFi64;

if cfg!(target_endian = "big") {
    assert_eq!(n.to_be(), n)
} else {
    assert_eq!(n.to_be(), n.swap_bytes())
}

fn to_le(self) -> i64

Converts self to little endian from the target's endianness.

On little endian this is a no-op. On big endian the bytes are swapped.

Examples

Basic usage:

fn main() { let n = 0x0123456789ABCDEFi64; if cfg!(target_endian = "little") { assert_eq!(n.to_le(), n) } else { assert_eq!(n.to_le(), n.swap_bytes()) } }

let n = 0x0123456789ABCDEFi64;

if cfg!(target_endian = "little") {
    assert_eq!(n.to_le(), n)
} else {
    assert_eq!(n.to_le(), n.swap_bytes())
}

fn checked_add(self, other: i64) -> Option<i64>

Checked integer addition. Computes self + other, returning None if overflow occurred.

Examples

Basic usage:

fn main() { assert_eq!(7i16.checked_add(32760), Some(32767)); assert_eq!(8i16.checked_add(32760), None); }

assert_eq!(7i16.checked_add(32760), Some(32767));
assert_eq!(8i16.checked_add(32760), None);

fn checked_sub(self, other: i64) -> Option<i64>

Checked integer subtraction. Computes self - other, returning None if underflow occurred.

Examples

Basic usage:

fn main() { assert_eq!((-127i8).checked_sub(1), Some(-128)); assert_eq!((-128i8).checked_sub(1), None); }

assert_eq!((-127i8).checked_sub(1), Some(-128));
assert_eq!((-128i8).checked_sub(1), None);

fn checked_mul(self, other: i64) -> Option<i64>

Checked integer multiplication. Computes self * other, returning None if underflow or overflow occurred.

Examples

Basic usage:

fn main() { assert_eq!(6i8.checked_mul(21), Some(126)); assert_eq!(6i8.checked_mul(22), None); }

assert_eq!(6i8.checked_mul(21), Some(126));
assert_eq!(6i8.checked_mul(22), None);

fn checked_div(self, other: i64) -> Option<i64>

Checked integer division. Computes self / other, returning None if other == 0 or the operation results in underflow or overflow.

Examples

Basic usage:

fn main() { assert_eq!((-127i8).checked_div(-1), Some(127)); assert_eq!((-128i8).checked_div(-1), None); assert_eq!((1i8).checked_div(0), None); }

assert_eq!((-127i8).checked_div(-1), Some(127));
assert_eq!((-128i8).checked_div(-1), None);
assert_eq!((1i8).checked_div(0), None);

fn checked_rem(self, other: i64) -> Option<i64>

Checked integer remainder. Computes self % other, returning None if other == 0 or the operation results in underflow or overflow.

Examples

Basic usage:

fn main() { use std::i32; assert_eq!(5i32.checked_rem(2), Some(1)); assert_eq!(5i32.checked_rem(0), None); assert_eq!(i32::MIN.checked_rem(-1), None); }

use std::i32;

assert_eq!(5i32.checked_rem(2), Some(1));
assert_eq!(5i32.checked_rem(0), None);
assert_eq!(i32::MIN.checked_rem(-1), None);

fn checked_neg(self) -> Option<i64>

Checked negation. Computes -self, returning None if self == MIN.

Examples

Basic usage:

fn main() { use std::i32; assert_eq!(5i32.checked_neg(), Some(-5)); assert_eq!(i32::MIN.checked_neg(), None); }

use std::i32;

assert_eq!(5i32.checked_neg(), Some(-5));
assert_eq!(i32::MIN.checked_neg(), None);

fn checked_shl(self, rhs: u32) -> Option<i64>

Checked shift left. Computes self << rhs, returning None if rhs is larger than or equal to the number of bits in self.

Examples

Basic usage:

fn main() { assert_eq!(0x10i32.checked_shl(4), Some(0x100)); assert_eq!(0x10i32.checked_shl(33), None); }

assert_eq!(0x10i32.checked_shl(4), Some(0x100));
assert_eq!(0x10i32.checked_shl(33), None);

fn checked_shr(self, rhs: u32) -> Option<i64>

Checked shift right. Computes self >> rhs, returning None if rhs is larger than or equal to the number of bits in self.

Examples

Basic usage:

fn main() { assert_eq!(0x10i32.checked_shr(4), Some(0x1)); assert_eq!(0x10i32.checked_shr(33), None); }

assert_eq!(0x10i32.checked_shr(4), Some(0x1));
assert_eq!(0x10i32.checked_shr(33), None);

fn saturating_add(self, other: i64) -> i64

Saturating integer addition. Computes self + other, saturating at the numeric bounds instead of overflowing.

Examples

Basic usage:

fn main() { assert_eq!(100i8.saturating_add(1), 101); assert_eq!(100i8.saturating_add(127), 127); }

assert_eq!(100i8.saturating_add(1), 101);
assert_eq!(100i8.saturating_add(127), 127);

fn saturating_sub(self, other: i64) -> i64

Saturating integer subtraction. Computes self - other, saturating at the numeric bounds instead of overflowing.

Examples

Basic usage:

fn main() { assert_eq!(100i8.saturating_sub(127), -27); assert_eq!((-100i8).saturating_sub(127), -128); }

assert_eq!(100i8.saturating_sub(127), -27);
assert_eq!((-100i8).saturating_sub(127), -128);

fn saturating_mul(self, other: i64) -> i64

Saturating integer multiplication. Computes self * other, saturating at the numeric bounds instead of overflowing.

Examples

Basic usage:

fn main() { use std::i32; assert_eq!(100i32.saturating_mul(127), 12700); assert_eq!((1i32 << 23).saturating_mul(1 << 23), i32::MAX); assert_eq!((-1i32 << 23).saturating_mul(1 << 23), i32::MIN); }

use std::i32;

assert_eq!(100i32.saturating_mul(127), 12700);
assert_eq!((1i32 << 23).saturating_mul(1 << 23), i32::MAX);
assert_eq!((-1i32 << 23).saturating_mul(1 << 23), i32::MIN);

fn wrapping_add(self, rhs: i64) -> i64

Wrapping (modular) addition. Computes self + other, wrapping around at the boundary of the type.

Examples

Basic usage:

fn main() { assert_eq!(100i8.wrapping_add(27), 127); assert_eq!(100i8.wrapping_add(127), -29); }

assert_eq!(100i8.wrapping_add(27), 127);
assert_eq!(100i8.wrapping_add(127), -29);

fn wrapping_sub(self, rhs: i64) -> i64

Wrapping (modular) subtraction. Computes self - other, wrapping around at the boundary of the type.

Examples

Basic usage:

fn main() { assert_eq!(0i8.wrapping_sub(127), -127); assert_eq!((-2i8).wrapping_sub(127), 127); }

assert_eq!(0i8.wrapping_sub(127), -127);
assert_eq!((-2i8).wrapping_sub(127), 127);

fn wrapping_mul(self, rhs: i64) -> i64

Wrapping (modular) multiplication. Computes self * other, wrapping around at the boundary of the type.

Examples

Basic usage:

fn main() { assert_eq!(10i8.wrapping_mul(12), 120); assert_eq!(11i8.wrapping_mul(12), -124); }

assert_eq!(10i8.wrapping_mul(12), 120);
assert_eq!(11i8.wrapping_mul(12), -124);

fn wrapping_div(self, rhs: i64) -> i64

Wrapping (modular) division. Computes self / other, wrapping around at the boundary of the type.

The only case where such wrapping can occur is when one divides MIN / -1 on a signed type (where MIN is the negative minimal value for the type); this is equivalent to -MIN, a positive value that is too large to represent in the type. In such a case, this function returns MIN itself.

Panics

This function will panic if rhs is 0.

Examples

Basic usage:

fn main() { assert_eq!(100u8.wrapping_div(10), 10); assert_eq!((-128i8).wrapping_div(-1), -128); }

assert_eq!(100u8.wrapping_div(10), 10);
assert_eq!((-128i8).wrapping_div(-1), -128);

fn wrapping_rem(self, rhs: i64) -> i64

Wrapping (modular) remainder. Computes self % other, wrapping around at the boundary of the type.

Such wrap-around never actually occurs mathematically; implementation artifacts make x % y invalid for MIN / -1 on a signed type (where MIN is the negative minimal value). In such a case, this function returns 0.

Panics

This function will panic if rhs is 0.

Examples

Basic usage:

fn main() { assert_eq!(100i8.wrapping_rem(10), 0); assert_eq!((-128i8).wrapping_rem(-1), 0); }

assert_eq!(100i8.wrapping_rem(10), 0);
assert_eq!((-128i8).wrapping_rem(-1), 0);

fn wrapping_neg(self) -> i64

Wrapping (modular) negation. Computes -self, wrapping around at the boundary of the type.

The only case where such wrapping can occur is when one negates MIN on a signed type (where MIN is the negative minimal value for the type); this is a positive value that is too large to represent in the type. In such a case, this function returns MIN itself.

Examples

Basic usage:

fn main() { assert_eq!(100i8.wrapping_neg(), -100); assert_eq!((-128i8).wrapping_neg(), -128); }

assert_eq!(100i8.wrapping_neg(), -100);
assert_eq!((-128i8).wrapping_neg(), -128);

fn wrapping_shl(self, rhs: u32) -> i64

Panic-free bitwise shift-left; yields self << mask(rhs), where mask removes any high-order bits of rhs that would cause the shift to exceed the bitwidth of the type.

Note that this is not the same as a rotate-left; the RHS of a wrapping shift-left is restricted to the range of the type, rather than the bits shifted out of the LHS being returned to the other end. The primitive integer types all implement a rotate_left function, which may be what you want instead.

Examples

Basic usage:

fn main() { assert_eq!((-1i8).wrapping_shl(7), -128); assert_eq!((-1i8).wrapping_shl(8), -1); }

assert_eq!((-1i8).wrapping_shl(7), -128);
assert_eq!((-1i8).wrapping_shl(8), -1);

fn wrapping_shr(self, rhs: u32) -> i64

Panic-free bitwise shift-right; yields self >> mask(rhs), where mask removes any high-order bits of rhs that would cause the shift to exceed the bitwidth of the type.

Note that this is not the same as a rotate-right; the RHS of a wrapping shift-right is restricted to the range of the type, rather than the bits shifted out of the LHS being returned to the other end. The primitive integer types all implement a rotate_right function, which may be what you want instead.

Examples

Basic usage:

fn main() { assert_eq!((-128i8).wrapping_shr(7), -1); assert_eq!((-128i8).wrapping_shr(8), -128); }

assert_eq!((-128i8).wrapping_shr(7), -1);
assert_eq!((-128i8).wrapping_shr(8), -128);

fn overflowing_add(self, rhs: i64) -> (i64, bool)

Calculates self + rhs

Returns a tuple of the addition along with a boolean indicating whether an arithmetic overflow would occur. If an overflow would have occurred then the wrapped value is returned.

Examples

Basic usage

fn main() { use std::i32; assert_eq!(5i32.overflowing_add(2), (7, false)); assert_eq!(i32::MAX.overflowing_add(1), (i32::MIN, true)); }

use std::i32;

assert_eq!(5i32.overflowing_add(2), (7, false));
assert_eq!(i32::MAX.overflowing_add(1), (i32::MIN, true));

fn overflowing_sub(self, rhs: i64) -> (i64, bool)

Calculates self - rhs

Returns a tuple of the subtraction along with a boolean indicating whether an arithmetic overflow would occur. If an overflow would have occurred then the wrapped value is returned.

Examples

Basic usage

fn main() { use std::i32; assert_eq!(5i32.overflowing_sub(2), (3, false)); assert_eq!(i32::MIN.overflowing_sub(1), (i32::MAX, true)); }

use std::i32;

assert_eq!(5i32.overflowing_sub(2), (3, false));
assert_eq!(i32::MIN.overflowing_sub(1), (i32::MAX, true));

fn overflowing_mul(self, rhs: i64) -> (i64, bool)

Calculates the multiplication of self and rhs.

Returns a tuple of the multiplication along with a boolean indicating whether an arithmetic overflow would occur. If an overflow would have occurred then the wrapped value is returned.

Examples

Basic usage

fn main() { assert_eq!(5i32.overflowing_mul(2), (10, false)); assert_eq!(1_000_000_000i32.overflowing_mul(10), (1410065408, true)); }

assert_eq!(5i32.overflowing_mul(2), (10, false));
assert_eq!(1_000_000_000i32.overflowing_mul(10), (1410065408, true));

fn overflowing_div(self, rhs: i64) -> (i64, bool)

Calculates the divisor when self is divided by rhs.

Returns a tuple of the divisor along with a boolean indicating whether an arithmetic overflow would occur. If an overflow would occur then self is returned.

Panics

This function will panic if rhs is 0.

Examples

Basic usage

fn main() { use std::i32; assert_eq!(5i32.overflowing_div(2), (2, false)); assert_eq!(i32::MIN.overflowing_div(-1), (i32::MIN, true)); }

use std::i32;

assert_eq!(5i32.overflowing_div(2), (2, false));
assert_eq!(i32::MIN.overflowing_div(-1), (i32::MIN, true));

fn overflowing_rem(self, rhs: i64) -> (i64, bool)

Calculates the remainder when self is divided by rhs.

Returns a tuple of the remainder after dividing along with a boolean indicating whether an arithmetic overflow would occur. If an overflow would occur then 0 is returned.

Panics

This function will panic if rhs is 0.

Examples

Basic usage

fn main() { use std::i32; assert_eq!(5i32.overflowing_rem(2), (1, false)); assert_eq!(i32::MIN.overflowing_rem(-1), (0, true)); }

use std::i32;

assert_eq!(5i32.overflowing_rem(2), (1, false));
assert_eq!(i32::MIN.overflowing_rem(-1), (0, true));

fn overflowing_neg(self) -> (i64, bool)

Negates self, overflowing if this is equal to the minimum value.

Returns a tuple of the negated version of self along with a boolean indicating whether an overflow happened. If self is the minimum value (e.g. i32::MIN for values of type i32), then the minimum value will be returned again and true will be returned for an overflow happening.

Examples

Basic usage

fn main() { use std::i32; assert_eq!(2i32.overflowing_neg(), (-2, false)); assert_eq!(i32::MIN.overflowing_neg(), (i32::MIN, true)); }

use std::i32;

assert_eq!(2i32.overflowing_neg(), (-2, false));
assert_eq!(i32::MIN.overflowing_neg(), (i32::MIN, true));

fn overflowing_shl(self, rhs: u32) -> (i64, bool)

Shifts self left by rhs bits.

Returns a tuple of the shifted version of self along with a boolean indicating whether the shift value was larger than or equal to the number of bits. If the shift value is too large, then value is masked (N-1) where N is the number of bits, and this value is then used to perform the shift.

Examples

Basic usage

fn main() { assert_eq!(0x10i32.overflowing_shl(4), (0x100, false)); assert_eq!(0x10i32.overflowing_shl(36), (0x100, true)); }

assert_eq!(0x10i32.overflowing_shl(4), (0x100, false));
assert_eq!(0x10i32.overflowing_shl(36), (0x100, true));

fn overflowing_shr(self, rhs: u32) -> (i64, bool)

Shifts self right by rhs bits.

Returns a tuple of the shifted version of self along with a boolean indicating whether the shift value was larger than or equal to the number of bits. If the shift value is too large, then value is masked (N-1) where N is the number of bits, and this value is then used to perform the shift.

Examples

Basic usage

fn main() { assert_eq!(0x10i32.overflowing_shr(4), (0x1, false)); assert_eq!(0x10i32.overflowing_shr(36), (0x1, true)); }

assert_eq!(0x10i32.overflowing_shr(4), (0x1, false));
assert_eq!(0x10i32.overflowing_shr(36), (0x1, true));

fn pow(self, exp: u32) -> i64

Raises self to the power of exp, using exponentiation by squaring.

Examples

Basic usage:

fn main() { let x: i32 = 2; // or any other integer type assert_eq!(x.pow(4), 16); }

let x: i32 = 2; // or any other integer type

assert_eq!(x.pow(4), 16);

fn abs(self) -> i64

Computes the absolute value of self.

Overflow behavior

The absolute value of i32::min_value() cannot be represented as an i32, and attempting to calculate it will cause an overflow. This means that code in debug mode will trigger a panic on this case and optimized code will return i32::min_value() without a panic.

Examples

Basic usage:

fn main() { assert_eq!(10i8.abs(), 10); assert_eq!((-10i8).abs(), 10); }

assert_eq!(10i8.abs(), 10);
assert_eq!((-10i8).abs(), 10);

fn signum(self) -> i64

Returns a number representing sign of self.

• 0 if the number is zero
• 1 if the number is positive
• -1 if the number is negative

Examples

Basic usage:

fn main() { assert_eq!(10i8.signum(), 1); assert_eq!(0i8.signum(), 0); assert_eq!((-10i8).signum(), -1); }

assert_eq!(10i8.signum(), 1);
assert_eq!(0i8.signum(), 0);
assert_eq!((-10i8).signum(), -1);

fn is_positive(self) -> bool

Returns true if self is positive and false if the number is zero or negative.

Examples

Basic usage:

fn main() { assert!(10i8.is_positive()); assert!(!(-10i8).is_positive()); }

assert!(10i8.is_positive());
assert!(!(-10i8).is_positive());

fn is_negative(self) -> bool

Returns true if self is negative and false if the number is zero or positive.

Examples

Basic usage:

fn main() { assert!((-10i8).is_negative()); assert!(!10i8.is_negative()); }

assert!((-10i8).is_negative());
assert!(!10i8.is_negative());

Trait Implementations

impl Display for i64

fn fmt(&self, f: &mut Formatter) -> Result<(), Error>

impl Debug for i64

fn fmt(&self, f: &mut Formatter) -> Result<(), Error>

impl UpperHex for i64

fn fmt(&self, f: &mut Formatter) -> Result<(), Error>

impl LowerHex for i64

fn fmt(&self, f: &mut Formatter) -> Result<(), Error>

impl Octal for i64

fn fmt(&self, f: &mut Formatter) -> Result<(), Error>

impl Binary for i64

fn fmt(&self, f: &mut Formatter) -> Result<(), Error>

impl Hash for i64

fn hash<H>(&self, state: &mut H) where H: Hasher

fn hash_slice<H>(data: &[i64], state: &mut H) where H: Hasher

impl Step for i64

fn step(&self, by: &i64) -> Option<i64>

Unstable (step_trait #27741)

: likely to be replaced by finer-grained traits

fn steps_between(start: &i64, end: &i64, by: &i64) -> Option<usize>

Unstable (step_trait #27741)

: likely to be replaced by finer-grained traits

impl Default for i64

fn default() -> i64

impl Clone for i64

fn clone(&self) -> i64

Returns a deep copy of the value.

fn clone_from(&mut self, source: &Self)

impl Ord for i64

fn cmp(&self, other: &i64) -> Ordering

impl PartialOrd<i64> for i64

fn partial_cmp(&self, other: &i64) -> Option<Ordering>

fn lt(&self, other: &i64) -> bool

fn le(&self, other: &i64) -> bool

fn ge(&self, other: &i64) -> bool

fn gt(&self, other: &i64) -> bool

impl Eq for i64

impl PartialEq<i64> for i64

fn eq(&self, other: &i64) -> bool

fn ne(&self, other: &i64) -> bool

impl ShrAssign<isize> for i64

fn shr_assign(&mut self, other: isize)

impl ShrAssign<i64> for i64

fn shr_assign(&mut self, other: i64)

impl ShrAssign<i32> for i64

fn shr_assign(&mut self, other: i32)

impl ShrAssign<i16> for i64

fn shr_assign(&mut self, other: i16)

impl ShrAssign<i8> for i64

fn shr_assign(&mut self, other: i8)

impl ShrAssign<usize> for i64

fn shr_assign(&mut self, other: usize)

impl ShrAssign<u64> for i64

fn shr_assign(&mut self, other: u64)

impl ShrAssign<u32> for i64

fn shr_assign(&mut self, other: u32)

impl ShrAssign<u16> for i64

fn shr_assign(&mut self, other: u16)

impl ShrAssign<u8> for i64

fn shr_assign(&mut self, other: u8)

impl ShlAssign<isize> for i64

fn shl_assign(&mut self, other: isize)

impl ShlAssign<i64> for i64

fn shl_assign(&mut self, other: i64)

impl ShlAssign<i32> for i64

fn shl_assign(&mut self, other: i32)

impl ShlAssign<i16> for i64

fn shl_assign(&mut self, other: i16)

impl ShlAssign<i8> for i64

fn shl_assign(&mut self, other: i8)

impl ShlAssign<usize> for i64

fn shl_assign(&mut self, other: usize)

impl ShlAssign<u64> for i64

fn shl_assign(&mut self, other: u64)

impl ShlAssign<u32> for i64

fn shl_assign(&mut self, other: u32)

impl ShlAssign<u16> for i64

fn shl_assign(&mut self, other: u16)

impl ShlAssign<u8> for i64

fn shl_assign(&mut self, other: u8)

impl BitXorAssign<i64> for i64

fn bitxor_assign(&mut self, other: i64)

impl BitOrAssign<i64> for i64

fn bitor_assign(&mut self, other: i64)

impl BitAndAssign<i64> for i64

fn bitand_assign(&mut self, other: i64)

impl RemAssign<i64> for i64

fn rem_assign(&mut self, other: i64)

impl DivAssign<i64> for i64

fn div_assign(&mut self, other: i64)

impl MulAssign<i64> for i64

fn mul_assign(&mut self, other: i64)

impl SubAssign<i64> for i64

fn sub_assign(&mut self, other: i64)

impl AddAssign<i64> for i64

fn add_assign(&mut self, other: i64)

impl<'a, 'b> Shr<&'a isize> for &'b i64

type Output = i64::Output

fn shr(self, other: &'a isize) -> i64::Output

impl<'a> Shr<&'a isize> for i64

type Output = i64::Output

fn shr(self, other: &'a isize) -> i64::Output

impl<'a> Shr<isize> for &'a i64

type Output = i64::Output

fn shr(self, other: isize) -> i64::Output

impl Shr<isize> for i64

type Output = i64

fn shr(self, other: isize) -> i64

impl<'a, 'b> Shr<&'a i64> for &'b i64

type Output = i64::Output

fn shr(self, other: &'a i64) -> i64::Output

impl<'a> Shr<&'a i64> for i64

type Output = i64::Output

fn shr(self, other: &'a i64) -> i64::Output

impl<'a> Shr<i64> for &'a i64

type Output = i64::Output

fn shr(self, other: i64) -> i64::Output

impl Shr<i64> for i64

type Output = i64

fn shr(self, other: i64) -> i64

impl<'a, 'b> Shr<&'a i32> for &'b i64

type Output = i64::Output

fn shr(self, other: &'a i32) -> i64::Output

impl<'a> Shr<&'a i32> for i64

type Output = i64::Output

fn shr(self, other: &'a i32) -> i64::Output

impl<'a> Shr<i32> for &'a i64

type Output = i64::Output

fn shr(self, other: i32) -> i64::Output

impl Shr<i32> for i64

type Output = i64

fn shr(self, other: i32) -> i64

impl<'a, 'b> Shr<&'a i16> for &'b i64

type Output = i64::Output

fn shr(self, other: &'a i16) -> i64::Output

impl<'a> Shr<&'a i16> for i64

type Output = i64::Output

fn shr(self, other: &'a i16) -> i64::Output

impl<'a> Shr<i16> for &'a i64

type Output = i64::Output

fn shr(self, other: i16) -> i64::Output

impl Shr<i16> for i64

type Output = i64

fn shr(self, other: i16) -> i64

impl<'a, 'b> Shr<&'a i8> for &'b i64

type Output = i64::Output

fn shr(self, other: &'a i8) -> i64::Output

impl<'a> Shr<&'a i8> for i64

type Output = i64::Output

fn shr(self, other: &'a i8) -> i64::Output

impl<'a> Shr<i8> for &'a i64

type Output = i64::Output

fn shr(self, other: i8) -> i64::Output

impl Shr<i8> for i64

type Output = i64

fn shr(self, other: i8) -> i64

impl<'a, 'b> Shr<&'a usize> for &'b i64

type Output = i64::Output

fn shr(self, other: &'a usize) -> i64::Output

impl<'a> Shr<&'a usize> for i64

type Output = i64::Output

fn shr(self, other: &'a usize) -> i64::Output

impl<'a> Shr<usize> for &'a i64

type Output = i64::Output

fn shr(self, other: usize) -> i64::Output

impl Shr<usize> for i64

type Output = i64

fn shr(self, other: usize) -> i64

impl<'a, 'b> Shr<&'a u64> for &'b i64

type Output = i64::Output

fn shr(self, other: &'a u64) -> i64::Output

impl<'a> Shr<&'a u64> for i64

type Output = i64::Output

fn shr(self, other: &'a u64) -> i64::Output

impl<'a> Shr<u64> for &'a i64

type Output = i64::Output

fn shr(self, other: u64) -> i64::Output

impl Shr<u64> for i64

type Output = i64

fn shr(self, other: u64) -> i64

impl<'a, 'b> Shr<&'a u32> for &'b i64

type Output = i64::Output

fn shr(self, other: &'a u32) -> i64::Output

impl<'a> Shr<&'a u32> for i64

type Output = i64::Output

fn shr(self, other: &'a u32) -> i64::Output

impl<'a> Shr<u32> for &'a i64

type Output = i64::Output

fn shr(self, other: u32) -> i64::Output

impl Shr<u32> for i64

type Output = i64

fn shr(self, other: u32) -> i64

impl<'a, 'b> Shr<&'a u16> for &'b i64

type Output = i64::Output

fn shr(self, other: &'a u16) -> i64::Output

impl<'a> Shr<&'a u16> for i64

type Output = i64::Output

fn shr(self, other: &'a u16) -> i64::Output

impl<'a> Shr<u16> for &'a i64

type Output = i64::Output

fn shr(self, other: u16) -> i64::Output

impl Shr<u16> for i64

type Output = i64

fn shr(self, other: u16) -> i64

impl<'a, 'b> Shr<&'a u8> for &'b i64

type Output = i64::Output

fn shr(self, other: &'a u8) -> i64::Output

impl<'a> Shr<&'a u8> for i64

type Output = i64::Output

fn shr(self, other: &'a u8) -> i64::Output

impl<'a> Shr<u8> for &'a i64

type Output = i64::Output

fn shr(self, other: u8) -> i64::Output

impl Shr<u8> for i64

type Output = i64

fn shr(self, other: u8) -> i64

impl<'a, 'b> Shl<&'a isize> for &'b i64

type Output = i64::Output

fn shl(self, other: &'a isize) -> i64::Output

impl<'a> Shl<&'a isize> for i64

type Output = i64::Output

fn shl(self, other: &'a isize) -> i64::Output

impl<'a> Shl<isize> for &'a i64

type Output = i64::Output

fn shl(self, other: isize) -> i64::Output

impl Shl<isize> for i64

type Output = i64

fn shl(self, other: isize) -> i64

impl<'a, 'b> Shl<&'a i64> for &'b i64

type Output = i64::Output

fn shl(self, other: &'a i64) -> i64::Output

impl<'a> Shl<&'a i64> for i64

type Output = i64::Output

fn shl(self, other: &'a i64) -> i64::Output

impl<'a> Shl<i64> for &'a i64

type Output = i64::Output

fn shl(self, other: i64) -> i64::Output

impl Shl<i64> for i64

type Output = i64

fn shl(self, other: i64) -> i64

impl<'a, 'b> Shl<&'a i32> for &'b i64

type Output = i64::Output

fn shl(self, other: &'a i32) -> i64::Output

impl<'a> Shl<&'a i32> for i64

type Output = i64::Output

fn shl(self, other: &'a i32) -> i64::Output

impl<'a> Shl<i32> for &'a i64

type Output = i64::Output

fn shl(self, other: i32) -> i64::Output

impl Shl<i32> for i64

type Output = i64

fn shl(self, other: i32) -> i64

impl<'a, 'b> Shl<&'a i16> for &'b i64

type Output = i64::Output

fn shl(self, other: &'a i16) -> i64::Output

impl<'a> Shl<&'a i16> for i64

type Output = i64::Output

fn shl(self, other: &'a i16) -> i64::Output

impl<'a> Shl<i16> for &'a i64

type Output = i64::Output

fn shl(self, other: i16) -> i64::Output

impl Shl<i16> for i64

type Output = i64

fn shl(self, other: i16) -> i64

impl<'a, 'b> Shl<&'a i8> for &'b i64

type Output = i64::Output

fn shl(self, other: &'a i8) -> i64::Output

impl<'a> Shl<&'a i8> for i64

type Output = i64::Output

fn shl(self, other: &'a i8) -> i64::Output

impl<'a> Shl<i8> for &'a i64

type Output = i64::Output

fn shl(self, other: i8) -> i64::Output

impl Shl<i8> for i64

type Output = i64

fn shl(self, other: i8) -> i64

impl<'a, 'b> Shl<&'a usize> for &'b i64

type Output = i64::Output

fn shl(self, other: &'a usize) -> i64::Output

impl<'a> Shl<&'a usize> for i64

type Output = i64::Output

fn shl(self, other: &'a usize) -> i64::Output

impl<'a> Shl<usize> for &'a i64

type Output = i64::Output

fn shl(self, other: usize) -> i64::Output

impl Shl<usize> for i64

type Output = i64

fn shl(self, other: usize) -> i64

impl<'a, 'b> Shl<&'a u64> for &'b i64

type Output = i64::Output

fn shl(self, other: &'a u64) -> i64::Output

impl<'a> Shl<&'a u64> for i64

type Output = i64::Output

fn shl(self, other: &'a u64) -> i64::Output

impl<'a> Shl<u64> for &'a i64

type Output = i64::Output

fn shl(self, other: u64) -> i64::Output

impl Shl<u64> for i64

type Output = i64

fn shl(self, other: u64) -> i64

impl<'a, 'b> Shl<&'a u32> for &'b i64

type Output = i64::Output

fn shl(self, other: &'a u32) -> i64::Output

impl<'a> Shl<&'a u32> for i64

type Output = i64::Output

fn shl(self, other: &'a u32) -> i64::Output

impl<'a> Shl<u32> for &'a i64

type Output = i64::Output

fn shl(self, other: u32) -> i64::Output

impl Shl<u32> for i64

type Output = i64

fn shl(self, other: u32) -> i64

impl<'a, 'b> Shl<&'a u16> for &'b i64

type Output = i64::Output

fn shl(self, other: &'a u16) -> i64::Output

impl<'a> Shl<&'a u16> for i64

type Output = i64::Output

fn shl(self, other: &'a u16) -> i64::Output

impl<'a> Shl<u16> for &'a i64

type Output = i64::Output

fn shl(self, other: u16) -> i64::Output

impl Shl<u16> for i64

type Output = i64

fn shl(self, other: u16) -> i64

impl<'a, 'b> Shl<&'a u8> for &'b i64

type Output = i64::Output

fn shl(self, other: &'a u8) -> i64::Output

impl<'a> Shl<&'a u8> for i64

type Output = i64::Output

fn shl(self, other: &'a u8) -> i64::Output

impl<'a> Shl<u8> for &'a i64

type Output = i64::Output

fn shl(self, other: u8) -> i64::Output

impl Shl<u8> for i64

type Output = i64

fn shl(self, other: u8) -> i64

impl<'a, 'b> BitXor<&'a i64> for &'b i64

type Output = i64::Output

fn bitxor(self, other: &'a i64) -> i64::Output

impl<'a> BitXor<&'a i64> for i64

type Output = i64::Output

fn bitxor(self, other: &'a i64) -> i64::Output

impl<'a> BitXor<i64> for &'a i64

type Output = i64::Output

fn bitxor(self, other: i64) -> i64::Output

impl BitXor<i64> for i64

type Output = i64

fn bitxor(self, other: i64) -> i64

impl<'a, 'b> BitOr<&'a i64> for &'b i64

type Output = i64::Output

fn bitor(self, other: &'a i64) -> i64::Output

impl<'a> BitOr<&'a i64> for i64

type Output = i64::Output

fn bitor(self, other: &'a i64) -> i64::Output

impl<'a> BitOr<i64> for &'a i64

type Output = i64::Output

fn bitor(self, other: i64) -> i64::Output

impl BitOr<i64> for i64

type Output = i64

fn bitor(self, rhs: i64) -> i64

impl<'a, 'b> BitAnd<&'a i64> for &'b i64

type Output = i64::Output

fn bitand(self, other: &'a i64) -> i64::Output

impl<'a> BitAnd<&'a i64> for i64

type Output = i64::Output

fn bitand(self, other: &'a i64) -> i64::Output

impl<'a> BitAnd<i64> for &'a i64

type Output = i64::Output

fn bitand(self, other: i64) -> i64::Output

impl BitAnd<i64> for i64

type Output = i64

fn bitand(self, rhs: i64) -> i64

impl<'a> Not for &'a i64

type Output = i64::Output

fn not(self) -> i64::Output

impl Not for i64

type Output = i64

fn not(self) -> i64

impl<'a> Neg for &'a i64

type Output = i64::Output

fn neg(self) -> i64::Output

impl Neg for i64

type Output = i64

fn neg(self) -> i64

impl<'a, 'b> Rem<&'a i64> for &'b i64

type Output = i64::Output

fn rem(self, other: &'a i64) -> i64::Output

impl<'a> Rem<&'a i64> for i64

type Output = i64::Output

fn rem(self, other: &'a i64) -> i64::Output

impl<'a> Rem<i64> for &'a i64

type Output = i64::Output

fn rem(self, other: i64) -> i64::Output

impl Rem<i64> for i64

This operation satisfies n % d == n - (n / d) * d. The result has the same sign as the left operand.

type Output = i64

fn rem(self, other: i64) -> i64

impl<'a, 'b> Div<&'a i64> for &'b i64

type Output = i64::Output

fn div(self, other: &'a i64) -> i64::Output

impl<'a> Div<&'a i64> for i64

type Output = i64::Output

fn div(self, other: &'a i64) -> i64::Output

impl<'a> Div<i64> for &'a i64

type Output = i64::Output

fn div(self, other: i64) -> i64::Output

impl Div<i64> for i64

This operation rounds towards zero, truncating any fractional part of the exact result.

type Output = i64

fn div(self, other: i64) -> i64

impl<'a, 'b> Mul<&'a i64> for &'b i64

type Output = i64::Output

fn mul(self, other: &'a i64) -> i64::Output

impl<'a> Mul<&'a i64> for i64

type Output = i64::Output

fn mul(self, other: &'a i64) -> i64::Output

impl<'a> Mul<i64> for &'a i64

type Output = i64::Output

fn mul(self, other: i64) -> i64::Output

impl Mul<i64> for i64

type Output = i64

fn mul(self, other: i64) -> i64

impl<'a, 'b> Sub<&'a i64> for &'b i64

type Output = i64::Output

fn sub(self, other: &'a i64) -> i64::Output

impl<'a> Sub<&'a i64> for i64

type Output = i64::Output

fn sub(self, other: &'a i64) -> i64::Output

impl<'a> Sub<i64> for &'a i64

type Output = i64::Output

fn sub(self, other: i64) -> i64::Output

impl Sub<i64> for i64

type Output = i64

fn sub(self, other: i64) -> i64

impl<'a, 'b> Add<&'a i64> for &'b i64

type Output = i64::Output

fn add(self, other: &'a i64) -> i64::Output

impl<'a> Add<&'a i64> for i64

type Output = i64::Output

fn add(self, other: &'a i64) -> i64::Output

impl<'a> Add<i64> for &'a i64

type Output = i64::Output

fn add(self, other: i64) -> i64::Output

impl Add<i64> for i64

type Output = i64

fn add(self, other: i64) -> i64

impl Zeroable for i64

impl From<u32> for i64

fn from(small: u32) -> i64

impl From<u16> for i64

fn from(small: u16) -> i64

impl From<u8> for i64

fn from(small: u8) -> i64

impl From<i32> for i64

fn from(small: i32) -> i64

impl From<i16> for i64

fn from(small: i16) -> i64

impl From<i8> for i64

fn from(small: i8) -> i64

impl FromStr for i64

type Err = ParseIntError

fn from_str(src: &str) -> Result<i64, ParseIntError>

impl One for i64

fn one() -> i64

Unstable (zero_one #27739)

: unsure of placement, wants to use associated constants

impl Zero for i64

fn zero() -> i64

Unstable (zero_one #27739)

: unsure of placement, wants to use associated constants